| D-861 | AC | 1 | Accumulator Unit, Koomey Type 80, (5) Station, (6) Bottles, (1) Air Pump, W/ Triplex Pump P/B Hatz 2-Cyl Diesel Engine, W/ Koomey Type 80 Remote | Photo |
| D-862 | AC | 1 | Accumulator Unit, Koomey Type 80, (5) Station, (6) Bottles, (1) Air Pump, No Power | Photo |
| D-843 | AT | 1 | Air Winch, Ingersoll-Rand Model EUA, S/N 912517BR, 5K, 3/8" Wire Rope, 6" Dia. Drum, 12-1/4" Dia. Flg, 4.81' | No Photo |
| R11-16 | AT | 1 | Air Winch, Ingersoll-Rand, Approx 4-Ton, W/ Pedestal Mount | Photo |
| B-04 | BH | 2 | Block/Hook Combination, (New) YG-250, 250-US Ton, W/ (5) 1-1/4" X 36" Sheaves, Hook Open Size 8", Spring Travel 8", Dimensions 134-1/8"L X 39-3/8"W X 27-9/16"H, 11,982 LBS, Mfg Date 12/08 | Photo |
| D-568 | BH | 1 | Block/Hook Combination, Continental Emsco RA-52, 500-Ton, W/ (6) 52" X 1-3/8" Sheaves, BJ-5500 Unitized Hook | Photo |
| H-09 | BH | 1 | Block/Hook Combination, Gaoyou-Hauxing YG170, 190-Ton, (5) 36" X 1-1/8" Sheaves, S/N U6U14 | Photo |
| D-860 | BH | 1 | Block/Hook Combination, Gaoyou-Hauxing BHU-350, 350 US-Ton, W/ (5) 50" X 1-1/4" Sheaves, Spring Traverl 8", S/N 08002, Mf Date 12-08, OAD 165"L X 53"W X 35"H, (New) | Photo |
| R11-06 | BH | 1 | Block/Hook Combination, Ideco Big Shorty, 400-Ton, W/ (6) 40" X 1-1/4" Sheaves | Photo |
| U-01 | BH | 1 | Ideco UTB 160-Ton, Block/Hook Combo, (Disassembled) | Photo |
| D-464 | BL | 1 | Block, Continental Emsco RA-30, 100-Ton, W/ (4) 30" X 1-1/8" Sheaves, Less Hook | Photo |
| D-697 | BP | 1 | Bell Nipple 21-1/4"- 3M, Flanged, 20" Pile X 5' Long | Photo |
| D-696 | BP | 1 | Bell Nipple 26-3/4"- 3M, Flanged, 30' Long | Photo |
| D-698 | BP | 1 | Bell Nipple 26-3/4"- 5M Flange W/ 24"- 5M X 6-1/2' Long Pipe, 1-1/2" Wall | Photo |
| D-545 | BP | 1 | Connector Hub, 21-1/4" X 10M, H4, (Very Good Condition) | Photo |
| A-01 | BP | 2 | Set's, Cameron Type U OEM Rams, (New) 13-5/8"- 15M X 3-1/2", W/ Can-Ram 350 High Temp Rubber Goods, Certified By Cameron | Photo |
| A-02 | BP | 2 | Set's, Cameron Type U OEM Rams, (New) 13-5/8"- 15M X 9-5/8", W/ Can-Ram 350 High Temp Rubber Goods, Certified By Cameron | Photo |
| A-03 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X 5" | Photo |
| A-04 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X 3-1/2" Offset | Photo |
| A-05 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X 2-7/8" Offset | Photo |
| A-06 | BP | 1 | Set, Cameron Type U, 21-1/4"- 2/3M X Blind | Photo |
| A-07 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X Blind | Photo |
| A-08 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X Shear | Photo |
| A-09 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X 10-3/4" | Photo |
| A-10 | BP | 1 | Set, Cameron Type U, 13-5/8"- 3/10M X 3-1/2" | Photo |
| D-545 | BP | 1 | BOP, Hydril 16-3/4"- 5M Type CK, Hubbed Bottom, Studded Top | Photo |
| D-540 | BP | 1 | BOP, Hydril 20-3/4" X 3M Single, Flanged Top And Bottom, 4-1/16" Flanged Side Outlets, Manual Locks, W/ Shear Rams | No Photo |
| D-537 | BP | 1 | BOP, Hydril 20-3/4" X 3M Single, Flanged Top And Bottom, H2S Trim, Flanged Side Outlets, Manual Locks, H2S Trim, W/ 5" Ram Blocks, S/N 31014 | No Photo |
| D-543 | BP | 1 | BOP, Shaffer Spherical Wedge Cover, 16-3/4" X 5M, Hubbed Bottom, Studded Top | Photo |
| D-702 | BP | 1 | DSA, 13-5/8"- 10M X 11"- 10M | Photo |
| D-701 | BP | 1 | DSA, 13-5/8"- 5M X 13-5/8"- 5M | Photo |
| D-546 | BP | 1 | Lot, Spools And Adapters | No Photo |
| D-759 | BP | 1 | Set, Cameron ISR Shear Rams, 13-5/8"- 5/10M, New Surplus | No Photo |
| D-638 | BP | 1 | Set, Shaffer Rams, 16-3/4" X CSO-Shear | Photo |
| D-708 | BP | 1 | Spool, 21-1/4" X 21-1/4", 12'- 8" Long | Photo |
| D-713 | BP | 1 | Spool, Drilling 13-5/8"-5M X 24" High, W/ (2) 2-1/16"- 5M Flanged Outlets | Photo |
| D-704 | BP | 1 | Spool, Spacer 13-5/8"- 10M X 13-5/8"- 10M, 12' Long | Photo |
| D-716 | BP | 1 | Spool, Spacer 13-5/8"- 5M X 5' Long, W/ 6"- 900 Flanged Outlet | Photo |
| D-715 | BP | 3 | Spools, Spacer 4-1/16"- 5M, (1) 15' L, (1) 6' L, (1) 4' L | Photo |
| D-714 | BP | 3 | Spools, Spacer 4-1/16"- 5M, (2) 10' L, (1) 8' L | Photo |
| D-675 | CE | 1 | Forklift, 2001 Skytrack 8042-14875, 8000# Capicity, 42' Reach W/ Cummins Diesel Engine | Photo |
| D-677 | CE | 1 | Forklift, Cat V-110-13V01756, 11,000# Capacity, Standard Mast, Side Shift, Canopy, Perkins Diesel Engine | Photo |
| U500-04 | DC | 46 | Drill Collars, (New) Grant Prideco, 6-1/2" OD X 30'L, 4-1/2" XH Conn, Slick, Sgl Zip | No Photo |
| U500-03 | DC | 26 | Drill Collars, (New) Grant Prideco, 8" OD X 30'L, 6-5/8" Reg Conn, Slick, Sgl Zip | No Photo |
| D-662 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 29.30' L, 4-1/2" XH | Photo |
| D-674 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 29.60' L, 4-1/2" XH | Photo |
| D-656 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 29.81' L, 4-1/2" XH | Photo |
| D-654 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 29.90' L, 4-1/2" XH | Photo |
| D-663 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 29.95' L, 4-1/2" XH | Photo |
| D-668 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 30.35' L, 4-1/2" XH | Photo |
| D-659 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 30.42' L, 4-1/2" XH | Photo |
| D-660 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 30.43' L, 4-1/2" XH | Photo |
| D-671 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-1/4" X 30.85' L, 4-1/2" XH | Photo |
| D-673 | DC | 1 | Drill Collar, Slick, 6-1/8" X 2-3/8" X 29.65' L, 4-1/2" XH | Photo |
| D-774 | DC | 1 | Drill Collar, Spiral, 4-1/2" X 2" X 29.47' L, 3-1/2" XH, DR | Photo |
| D-813 | DC | 1 | Drill Collar, Spiral, 4-1/2" X 2-1/4" X 30.60' L, 3-1/2" XH, DR | Photo |
| D-815 | DC | 1 | Drill Collar, Spiral, 4-1/2" X 2-1/8" X 30.85' L, 3-1/2" XH, DR | Photo |
| D-767 | DC | 1 | Drill Collar, Spiral, 4-1/2" X 2-3/8" X 29.67' L, 3-1/2" IF, DR | Photo |
| D-775 | DC | 1 | Drill Collar, Spiral, 4-3/8" X 2" X 28.96' L, 3-1/2" XH, DR | Photo |
| D-816 | DC | 1 | Drill Collar, Spiral, 4-7/16" X 1-7/8" X 31.27' L, 3-1/2" XH, DR | Photo |
| D-814 | DC | 1 | Drill Collar, Spiral, 4-7/16" X 2" X 30.38' L, 3-1/2" XH, DR | Photo |
| D-817 | DC | 1 | Drill Collar, Spiral, 4-7/16" X 2" X 30.92' L, 3-1/2" XH, DR | Photo |
| D-786 | DC | 1 | Drill Collar, Spiral, 6-15/16" X 2-7/8" X 31.52' L, 4-1/2" XH, HB, DR | Photo |
| D-765 | DC | 1 | Drill Collar, Spiral, 6-3/8" X 2-7/8" X 31.25' L, 4-1/2" XH, HB, DR | Photo |
| D-787 | DC | 1 | Drill Collar, Spiral, 6-3/8" X 2-7/8" X 31.33' L, 4-1/2" XH, HB, DR | Photo |
| D-764 | DC | 1 | Drill Collar, Spiral, 6-3/8" X 2-7/8" X 31.55' L, 4-1/2" XH, HB, DR | Photo |
| D-785 | DC | 1 | Drill Collar, Spiral, 6-5/16" X 2-7/8" X 29.89' L, 4-1/2" XH, HB, DR | Photo |
| R11-37 | DC | 18 | Drill Collars, 6" to 6-3/8" OD, Spiral & Slick 28' to 30' Long | Photo |
| R11-38 | DC | 4 | Drill Collars, 7-3/4" to 8" OD, Spiral, 29' Long | Photo |
| D-627 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 5-15/16" OD Tool Jt | Photo |
| D-630 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6" OD Tool Jt | Photo |
| D-632 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6" OD Tool Jt | Photo |
| D-633 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-1/16" OD Tool Jt | Photo |
| D-634 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-1/4" OD Tool Jt | Photo |
| D-629 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-3/8" OD Tool Jt | Photo |
| D-626 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-5/16" OD Tool JT | Photo |
| D-628 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-5/16" OD Tool JT | Photo |
| D-631 | DP | 1 | Jt, 4-1/2" Convententional Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-5/16" OD Tool JT | Photo |
| D-645 | DP | 1 | Jt, 4-1/2" Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-1/2" OD Tool Jt | Photo |
| D-646 | DP | 1 | Jt, 4-1/2" Hevi-Wate Drill Pipe, 4-1/2" XH, BN, 6-1/2" OD Tool Jt | Photo |
| D-623 | DP | 1 | Jt, 5" Conventional Hevi-Wate Drill Pipe, 4-1/2" IF, BN, 6-15/16" OD Tool Jt | Photo |
| D-625 | DP | 1 | Jt, 5" Conventional Hevi-Wate Drill Pipe, 4-1/2" IF, BN, 6-5/16" OD Tool Jt | Photo |
| D-622 | DP | 1 | Jt, 5" Conventional Hevi-Wate Drill Pipe, 4-1/2" IF, BN, 6-7/16" OD Tool Jt | Photo |
| D-624 | DP | 1 | Jt, 5" Conventional Hevi-Wate Drill Pipe, 4-1/2" IF, BN, 6-7/16" OD Tool Jt | Photo |
| D-776 | DP | 30 | Jts, 4-1/2" Hevi-Wate Drill Pipe, DP Master, 4-1/2" XH, 31'L, W/ 6-3/8" X 2-7/8" X 24"L Tool Joint, (New) | Photo |
| H-17 | DP | 23 | Jts, 5" Hevi-Wate Drill Pipe, 4-1/2" IF, HB, (Used On One Well W/ Inspection Papers) | Photo |
| M-02 | DP | 7 | Jts, 3-1/2" Drilco Hevi-Wate Drill Pipe, 3-1/2" IF, New-Unused, Hard Band | Photo |
| M-01 | DP | 50 | Jts, 5" Drilco Hevi-Wate Drill Pipe, 4-1/2" IF, New-Unused, Hard Band | Photo |
| D-818 | DP | 1 | Lot, (225) Grant Prideco Plastic 4-1/2" XH Thread Protectors | Photo |
| U500-02 | DP | 1 | Lot, (New) Drill Pipe, 20,000 ft, Grant Prideco, 4-1/2", 16.60#, Grade G-105, NC-46 Conn, Range 2, Plastic Coated, $65.61 Per Ft | No Photo |
| U500-01 | DP | 1 | Lot, (New) Drill Pipe, 20,000 ft, Grant Prideco, 5", 19.50#, Grade G-105, NC-50 Conn, Range 2, Plastic Coated, $68.66 Per Ft | No Photo |
| R-11 | DR | 1 | Drilling Rig (Rig# 11) OIME SL7 1200-HP, Mechanical, Click Link For Detailed Description And Pictures | Details Photos |
| R-08 | DR | 1 | Drilling Rig (Rig# 8) OIME SL-7 Heli-Rig 1000-HP (Rebuilt), Drawworks 1-1/8" Lebus Grooved, 342A Hydromatic Brake, Drillers Console, Catworks W/ Foster Catheads, 4-Engine Compound (Rebuilt) P/B (4) Cat 3406 C15 Diesel Engines (New), LCM Mast 131' X 420,000 SHL, Crown Block W/ (6) 42" Sheaves (1) 56" Fastline, Substructure 17' Low Lift Rated 450,000 Setback, BOP's (2) Shaffer 13-5/8"- 5M Singles, (Rebuilt) (1) Hydril GK 13-5/8"- 3M W/ 5M Bottom Flange (Rebuilt), OCO 5-Station Closing Unit (New), (2) Triplex Mud Pumps OIME H-700, Emsco 250-Ton Block W/ WW Hydra Hook (Rebuilt), Ideco 23" X 44-1/4" Rotary Table (Rebuilt), Gray B-44 300-Ton Swivel (Rebuilt), Top Dog House (New), Bottom House (New), Complete Mud System (6) Fly Pit's (New), (2) Gen Set's Cat 3406 C15 SR4 320KW (New), Diesel Tanks, Water Tanks, Pipe Racks, Catwalk, Junk Box, Handling Tools, Rig Is 75% New, Rig Will Move By Helicopter & Will Break Down In 4800LB Loads Except Drawworks, Located In Texas, Click Link For Detailed Discription & Pictures | Details Photos pdf file |
| U131-01 | DR | 1 | Drilling Rig, (Rig 131) Dugan DS-5, 500-HP, 1-1/8" Grooved, W/ Parmac 122 Brake, (2) Catheads, (1) Engine Drive, P/B (1) Cat 3408 Diesel Engine, LC Moore 94' X 8' X 192,00 SHL, 300,000lbs GNM Mast, S/N 27157, LC Moore 10'H Free Standing Substructure, 300,000 Capacity, All Trailer Mounted, Click Link For Detailed Description | Photo |
| U149-01 | DR | 1 | Drilling Rig, (Rig 149) Drawworks, Ideco H-525, 500-HP, 1-1/8" Grooved, Parkersburg 22" Dbl Brake, W/ 2-Engine Compound, Quincy Air Compressor, (2) Catheads, Controls, Complete, Click Link For Detailed Description | Photo |
| U18-01 | DR | 1 | Drilling Rig, (Rig 18) Drawworks, BDW-650, 650-HP, 1-1/4" Grooved W/ 2-Engine Compound, Pedestal Pump Drive, (2) Catheads, Parmac 342 Brake, P/B (2) Cat D-353 Diesel Engines, Click Link For Detailed Description | Photo |
| U27-01 | DR | 1 | Drilling Rig, (Rig 27) Drawworks, BDW-650, 650-HP, 1-1/4" Grooved W/ 2-Engine Compound, (2) Catheads, Parmac 342 Brake, P/B (2) Cat D-353 Diesel Engines, Click Link For Detailed Description | Photo |
| U25-01 | DR | 1 | Drilling Rig, (Rig 25), Drawworks, Gardner Denver 700, 800-HP, 1-1/4" Grooved, W/ 2-Engine Compound P/B (2) Cat D-379 Diesel Engines, (2) National Torque Converters, (2) Catheads, 342 Brake, Automatic Driller, (2) Quincy Air Compressors, Air Console, Click Link For Detailed Description | Photo |
| B-02 | DR | 1 | Drilling Rig, Cabot 900 Series, Carrier Mounted Drilling Rig, Click Link For Details | Photos |
| R-34 | DR | 1 | Drilling Rig, (Rig# 34) National 1320UE 2000-HP, Complete With Top Drive, Click Link For Detailed Description | Details Photos |
| V-01 | DR | 1 | Drilling Rig, National 1320UE 2000-HP (New & Refurbished), Drawworks (Rebuilt) W/ Wichita Disc Brake (New), P/B (2) GE 752 1000-HP Elec Motors (Rebuilt), Skytop Brewster Mast 142' X 25' Base 1,000,000 SHL W/ (7) Sheave Crown Block (Rebuilt & Certified), Box On Box 30' High Substructure (New & Certified), (4) Cat 3512 Gen Set's (New), (2) Gardner Denver PZ11 Mud Pumps Complete P/B (2) GE 752 Elec Motors (Rebuilt), 37.5 Rotary Table (Rebuilt), Oilwell 500-Ton 6-Sheave Block, National 500-Ton Hook (Rebuilt), National P-500 Swivel, BOP Stack (1) Hydril GK 13-5/8"- 5M, 10M Bottom Flg, Std Top, (2) Hydril 13-5/8"-10M Dbl & Sgl, Flgd Top & Bottom, (BOP's Are Rebuilt & Certified By Hydril), All Equipment Listed Above Is Ready To Use, If You Want The Rig Finished With New SCR House & All Other Equipment To Complete We Can Finish The Rig In About 90 Days, If You Want A Top Drive That Will Be Seperate Price | Photos |
| B-03 | DR | 1 | Drilling Rig, National 1320UE 2000-HP SCR Electric, (70% New & 30% Refurbished), Click Link For Details | Photos |
| B-01 | DR | 1 | Drilling Rig, Trailer Mounted 750-HP Drilling / Workover Rig, Click Link For Details | Photos |
| B-05 | DR | 1 | Drilling Rig, ZJ40D, 1000-HP SCR Electric, Click Link For Details And Pictures | Details Photos |
| R-19 | DR | 1 | Drilling Rigs, Carrier Mounted, U.S.A. Built, All New, 175-HP to 775-HP, 2 Weeks Delivery | Photo |
| R-35 | DR | 1 | Drilling Rig, New Chinese Model ZJ30, Truck Mounted 750-HP Drilling Rig, Price 3.6 Mil, Click Link For Detailed Description And Pictures | Photos |
| R-03 | DR | 1 | Mast/Substructure Drawworks, 2000-HP, Remanufactured and Certified, Lee C Moore, Beam Leg, 1,330,000 SHL Mast, Substructure 30' Floor Height, Drawworks Oilwell E-2000, Rotary Table Oilwell 37-1/2" W/ Oilwell Rotary Drive Transmission, Ready For Delivery, Located In Texas | Photos |
| J-01 | DR | 1 | Workover Rig, 550-HP, Double Drum, 108' X 350K Mast, All Wheel Drive, Tier 3 Cat C15 Diesel Engines, Cat TH35 Automatic Transmission, Drilling Depth 4950', Service Depth 10560', Hook Load 126.5 Ton, 1" Wireline, Carrier Drive Type 10 X 8, Overall Dimensions, 61' X 9' X 14' | Photo |
| L-01 | DR | 8 | Offshore Unsinkable Free Fall Life Rescue Boats, W/ Oxygen Supply, 4-Cyl Diesel Engines, (These engines work at any angle and under water for 15 min.) 55-Person Capacity, Manufactured In Denmark, (6) Fiskers, (2) Harding, Can Be Refurbished And Certified For 15 Years or more | Photo |
| R11-01 | DW | 1 | Drawworks, OIME SL-7, 1200-HP, Complete W/ 3-Engine Compound, Catworks, Torque Tube, Parmac 265 Brake, Catheads | Photo |
| D-587 | DW | 1 | Lot, Roller Bearings For Gardner Denver 1100 Drawworks, (4) American AD-5036 GD# 106351, (4) American AD-5038RWS GD# 106350, (New) | No Photo |
| D-757 | DW | 1 | National 80-B Drawworks, S/N 018-0122 With (2) GE 752 Traction Motors | No Photo |
| D-186 | DW | 1 | Wilson 90 Drawworks, 900-HP W/ 2-Engine Compound | Photo |
| D-726 | EL | 1 | Set, Elevator Bails, 3-1/2" X 146" X 500-Ton | Photo |
| D-844 | EL | 1 | Set, Elevator Links, 1-3/4" X 43" (New) | No Photo |
| D-849 | EL | 1 | Set, Elevator Links, 2-1/2" X 109" X 350-Ton (New) | No Photo |
| R11-40 | EL | 1 | Set, Elevator Links, 2-1/4" X 132" | Photo |
| D-432 | EL | 1 | Set, Elevator Links, 2-3/4" X 108" X 350-Ton, MPI & Pull Tested | Photo |
| H-11 | EL | 1 | Set, Elevator Links, 2-3/4" X 96", 350-Ton | Photo |
| D-595 | EL | 1 | Set, Elevator Links, Taixing Petro DH2250, 2-1/2" X 108", 250-Ton, (New), (MPI & Pull Tested With Papers) | Photo |
| D-594 | EL | 1 | Set, Elevator Links, Taixing Petro DH3150, 2-3/4" X 133", 350-Ton, (New), (MPI & Pull Tested With Papers) | Photo |
| R11-14 | FT | 1 | Fuel Tank, Horizontal, 10,000-Gal, 8' Dia X 28'L, W/ (2) 1-1/2" X 1-1/2" Transfer Pumps P/B Elec Motor, Skidded | Photo |
| R11-13 | FT | 1 | Fuel Tank, Horizontal, 6000-Gal, 6' Dia X 30'L, Skidded | Photo |
| R11-29 | GS | 1 | Generator House W/ (2) Cat 3412 Model SR4 Gen Set's, 455-KW, 240/480 Volt, 3-Phase, Elec Start, Sullivan 30-DG Elec Air Compressor, SQ-D Model 6 Electric Control Panel, Transformer, Mounted In 12'W X 40'L Rd Top, Crimped Wall House W/ Rig Lights, Skidded | Photo |
| D-863 | GS | 1 | Generator, 20-KW, P/B Detroit 3-71 Diesel Engine, Electric Starter, Radiator | Photo |
| D-551 | HK | 1 | Hook, Aker Maritime Hydraulics 750MT W/ Clevis | Photo |
| D-641 | HK | 1 | Hook, BJ-5500, 500-Ton | Photo |
| D-839 | HK | 1 | Hook, BJ-5500, 500-Ton, (Lower Hook For Top Drive) | Photo |
| D-229 | HO | 1 | Rotary Hose, Blackgold, 3-1/2" X 5M X 90' (New) | Photo |
| D-717 | HT | 1 | Elevator, BJ, MGG, 250-Ton, 5" BN | Photo |
| R11-21 | HT | 1 | Elevator, Drill Pipe, WW, 5", 350-Ton, Center Latch (No Latch) | Photo |
| 285-14 | HT | 7 | Elevator, Slip Type, MYT, 40-Ton, W/ 2-3/8"- 2-7/8" Slips (New) | Photo |
| 331-009 | HT | 8 | Elevator, Sq. Shoulder, TA-100, 2-3/8" EUE, 100-Ton, Dbl Latch, (New) | Photo |
| 331-017 | HT | 8 | Elevator, Sq. Shoulder, TA-100, 2-7/8" EUE, 100-Ton, Dbl Latch, (New) | Photo |
| 306-024 | HT | 1 | Elevator, Sq. Shoulder, TA-100, 3-1/2" EUE, 100-Ton, Dbl Latch, (New) | Photo |
| 338-01 | HT | 2 | Elevator, Sq. Shoulder, TA-35, 1", 35-Ton, Dbl Latch, (New) | Photo |
| 338-05 | HT | 2 | Elevator, Sq. Shoulder, TA-35, 1-1/2", 35-Ton, Dbl Latch, (New) | Photo |
| 338-03 | HT | 2 | Elevator, Sq. Shoulder, TA-35, 1-1/4", 35-Ton, Dbl Latch, (New) | Photo |
| 338-09 | HT | 9 | Elevator, Sq. Shoulder, TA-35, 2-3/8" EUE, 35-Ton, Dbl Latch, (New) | Photo |
| 338-14 | HT | 7 | Elevator, Sq. Shoulder, TA-35, 2-7/8" EUE, 35-Ton, Dbl Latch, (New) | Photo |
| 338-15 | HT | 8 | Elevator, Sq. Shoulder, TA-65, 2-3/8" EUE, 65-Ton, Dbl Latch, (New) | Photo |
| 338-17 | HT | 8 | Elevator, Sq. Shoulder, TA-65, 2-7/8" EUE, 65-Ton, Dbl Latch, (New) | Photo |
| 339-079 | HT | 14 | Elevator, Sucker Rod 1" (New) | Photo |
| 339-037 | HT | 14 | Elevator, Sucker Rod 1/2"- 5/8" (New) | Photo |
| 339-065 | HT | 14 | Elevator, Sucker Rod 3/4"- 7/8" (New) | Photo |
| 339-051 | HT | 14 | Elevator, Sucker Rod 5/8"- 3/4" (New) | Photo |
| D-837 | HT | 1 | Pipe Spinner, Varco SSW-10 | No Photo |
| 335-02 | HT | 50 | Power Tong Insert Dies For XQ114/6YB, 2-7/8" (73-89) For Master Tong (Can Be Used For 3-1/2") | No Photo |
| 335-03 | HT | 50 | Power Tong Inserts For XQ114/6YB, 2-7/8", 3-1/2", 4-1/2", (89-142) For Backup Tong | No Photo |
| 333-01 | HT | 3 | Power Tong, Hydraulic, Teda (New), XQ114/6YB, Complete W/ 2-3/8", 2-7/8", 3-1/2", 4-1/2" Jaws, Dies, And Backup, Max Work Pressure 1600 PSI, High Gear Max Speed 114 RPM, High Gear Max Torque 1100 Ft. Lbs, Low Gear Max Speed 27 RPM, Low Gear Max Torque 4400 Ft. Lbs, API Certified 7K-0066 | Photo |
| 339-153 | HT | 2 | Power Tong, Hydraulic, Teda (New), XQ89/3YC, Complete W/ 2-3/8", 2-7/8", 3-1/2", Jaws, Dies, And Backup | No Photo |
| 309-35 | HT | 51 | Safety Clamp, Drill Collar, Type C, 12 Seg, 8-1/2"- 9-5/8", (New) | Photo |
| 333-12 | HT | 52 | Safety Clamp, Drill Collar, Type T, 6 Seg, 3-1/4"- 4-1/2", (New) | Photo |
| D-835 | HT | 2 | Set, BJ Tongs | No Photo |
| R11-19 | HT | 1 | Set, Rotary Tongs, AOT HT-65, W/ Jaws | Photo |
| 330-15 | HT | 8 | Slip, Drill Collar, DCS-L, 6-3/4"- 8-1/4", 11-Segment, (New) | Photo |
| 323-043 | HT | 3 | Slip, Drill Collar, DCS-L, 8-1/2"- 10", (New) | Photo |
| 323-063 | HT | 3 | Slip, Drill Collar, DCS-R, 4-1/2"- 6", (New) | Photo |
| 323-052 | HT | 13 | Slip, Drill Collar, DCS-R, 5-1/2"- 7", 9-Segment, (New) | Photo |
| R11-23 | HT | 1 | Slip, Drill Collar, DCS-R, 6-1/2"- 8" | Photo |
| 323-087 | HT | 5 | Slip, Drill Pipe, SDML, 3-1/2"- 4-1/2", Dressed W/ 4-1/2" Inserts, Flex Handles, (New) | Photo |
| 321-04 | HT | 1 | Slip, Drill Pipe, SDML, 4"- 5", Dressed W/ 5" Inserts, Steel Handles, (New) | Photo |
| 324-05 | HT | 1 | Slip, Drill Pipe, SDS, 2-3/8"- 3-1/2", Dressed W/ 2-7/8" Inserts, Steel Handles, (New) | Photo |
| 323-092 | HT | 7 | Slip, Drill Pipe, SDS, 3-1/2"- 4-1/2", Dressed W/ 4-1/2" Inserts, Flex Handles, (New) | Photo |
| 323-066 | HT | 3 | Slip, Drill Pipe, SDXL, 4"- 5", Dressed W/ 5" Inserts, Flex Handles, (New) | Photo |
| R11-22 | HT | 1 | Slip, Drill Pipe, SDXL, 4-1/2" | Photo |
| R11-41 | IN | 1 | Wireline Unit, Hyd/Elec, Skidded | Photo |
| 327-06 | KD | 4 | Kelly Drive Bushing, 4KRVS, Sq Drive, W/ 4-1/4" Sq Rollers (New) | Photo |
| W-01 | KD | 1 | Kelly Drive Bushing, HDP, Pin Drive, W/ 5-1/4" Hex Rollers (New) | No Photo |
| 338-22 | KD | 1 | Kelly Drive Bushing, HDS, Sq Drive, W/ 4-1/4" Hex Rollers (New) | Photo |
| 327-11 | KD | 2 | Kelly Drive Bushing, HDS, Sq Drive, W/ 5-1/4" Hex Rollers (New) | Photo |
| R11-09 | KD | 1 | Kelly Drive Bushing, Varco HDP, Pin Drive W/ 5-1/4" Hex Rollers | Photo |
| H-08 | KD | 1 | Kelly Drive Bushing, Varco HDS, Sq Drive, W/ 5-1/4" Hex Rollers | Photo |
| 320-05 | KD | 1 | Set, HD Kelly Drive Rollers 4-1/4" Hex, (New) | No Photo |
| R11-33 | KD | 1 | Kelly Hose, 3" X 55' | Photo |
| R11-32 | KD | 1 | Kelly Spinner, International W/ Kelly Cock, Less Motor | Photo |
| D-821 | KD | 1 | Kelly, 3-1/2" Square | Photo |
| R11-10 | KD | 1 | Kelly, 5-1/4" Hex, 45' | Photo |
| H-07 | KD | 1 | Kelly, 5-1/4" Hex X 40' (Good Used) | Photo |
| D-829 | MC | 1 | Lot, (13) Chicksan Loops, 2" X 10M | Photo |
| R11-34 | MC | 1 | Lot, (15) Lift Subs, (8) Changeover Subs | Photo |
| D-841 | MC | 1 | Lot, (3) Boxes Of Misc Spare Parts | No Photo |
| R11-04 | MC | 1 | Lot, Matting Boards | Photo |
| R11-43 | MC | 1 | Lubster, 5-Compartment | Photo |
| R11-35 | MC | 1 | Tool Basket, 3'H X 8'W X 30'L, W/ Storage On Each End, Skidded | Photo |
| R11-11 | ME | 1 | 3-Tank Mud System Complete, (1) Suction Tank, 8'H X 10'W X 30'L, Crimped Wall, 3-Compt, (3) Brandt 10-HP Agitators, Mud Hopper, Halco & Mission Magnum 6 X 8 Cent Pumps P/B 75-HP Elec Motors, 6' Covered Porch, Pit Covers, Top Walkway, Skidded, (1) Volume Tank, 8'H X 10'W X 48'L, 3-Compt, (2) MCM 5 X 6 Cent Pumps P/B 50-HP Elec Motors, 10' Porch Ext, Side Mtd Cat Walks, Skidded, (1) Shaker Tank, 8'H X 10'W X 48'L, Crimped Wall, 3-Comp, (3) Brandt 10-HP Mud Agitators, Top Mtd Walkways, Skidded, Premix Tank 400-BBL W/ (2) Mission Magnum 3 X 4 Cent Pumps P/B 20-HP Elec Motors, Harrisburg 2-Cone Desander, 12-Cone Desilter W/ (9) Cones, (3) Pit Covers, Stairs | Photo |
| R11-26 | ME | 1 | JMC Mud/Gas Buster Separator, 5" Dia X 14'L, Skid 8'W X 21'L | Photo |
| R11-42 | ME | 1 | Mud Bucket, 5"ID X 72"L | Photo |
| D-848 | ME | 1 | Mud Mixer Tank, 6'H X 10'W X 30'L, 3-Compartment, Top Mtd Walkways, 8'L Enclosed Room, 10-Cone Desilter, Skidded | No Photo |
| R11-27 | ME | 1 | Swaco Degasser, W/ Air Compressor P/B 5-HP Elec Motor | Photo |
| W-06 | MP | 2 | Charging Pump, 5 Star, 5 X 6, Unitized For Belt Drive Including Liner Wash Pipe (New) | No Photo |
| W-05 | MP | 1 | Demco Style Shear Relief Valve, 3"-5M (New) | No Photo |
| D-834 | MP | 2 | Fluid Ends, 1600-HP, 12-P-160 (Unused) | No Photo |
| D-490 | MP | 1 | Gardner Denver FGFXGJ Duplex Pump, P/B Detroit 3-71 diesel Engine W/ PTO Clutch, Elec Start, Radiator, Guages, Skidded | Photo |
| D-463 | MP | 1 | Lot, (10) Pump Drive & Traction Motor Drive Sprockets | No Photo |
| R11-02 | MP | 1 | Mud Pump, Ideco T-1000 Triplex, P/B Cat D-398 Diesel Engine, Hydril K-20-5000 Pulsation Dampener, Mission Magnum 8 X 6 Charging Pump, Pressure Gauge, Oteco Relief Valve, Belt Drive, Air Clutch, Vibrator Hose, Master Skid | Photo |
| D-855 | MP | 1 | Mud Pump, Oilwell A-1700-PT Triplex, 1700-HP, W/ Pulsation Dampener, Forged Steel Fluid End Module, Bull Wheel, Belt Guard, Duel Drive, Skidded, S/N P18540, (Core Pump) | Photo |
| D-856 | MP | 1 | Mud Pump, Oilwell A-1700-PT Triplex, 1700-HP, W/ Pulsation Dampener, Forged Steel Fluid End Module, Bull Wheel, Belt Guard, Duel Drive, Skidded, S/N P185216, (Core Pump) | Photo |
| D-758 | MP | 2 | Mud Pump, National 9-P-1000 Triplex, W/N 017-0144 & 017-0145, With (2) 752 Traction Motors | No Photo |
| H-01 | MP | 1 | Pulsation Dampener, GH Mattco 5420, S/N 200376 | Photo |
| H-02 | MP | 1 | Pulsation Dampener, Hydril K-20-5000 | Photo |
| D-591 | MP | 1 | Suction Strainer For Contintal Emsco Triplex Pump, (Unused) | Photo |
| D-592 | MP | 1 | Suction Strainer For Triplex Pump, Electric Centrifugal Oiler Pump, Relief Valves, (11) Pump Pressure Gauges (Most Unused) | Photo |
| W-07 | MP | 20 | Well Service Triplex Pump, RS-W440, 440-HP, Chinese, Rongsheng Machinery Manufacturing (New) | Photo |
| R11-01A | MS | 1 | Mast & Sub: Parco 136' X 750,000 SHL, Crown Block W/ (6) 48" X 1-1/4" Sheaves, (1) Fastline Sheave, Substructure: Parco 21' High X 750,000 X 500,000 Set Back W/ (2) Catwalks, V-Door Ramp, Hand Rails, Steps, | Photo |
| R11-01D | MS | 1 | Complete Set of Rig Lights For Mast & Sub | No Photo |
| R11-01E | MS | 2 | Catwalks | No Photo |
| R11-01F | MS | 1 | National Deadline Anchor | No Photo |
| D-845 | PH | 1 | Shipping Container Converted to Tool Pusher House Office, 8'W X 8'H X 40'L, Insulated W/ (2) Amana Heat & Air Unit Incomplete, Mtd on 3-Runner Skid (New) | No Photo |
| R11-01B | PU | 3 | Cat C-15 Diesel Engines, Complete With Skids | Photo |
| D-857 | RA | 6 | Set's Triangle Pipe Racks | No Photo |
| W-02 | RT | 1 | Insert Bowl #1 For 27-1/2" Rotary Table (New) | No Photo |
| W-03 | RT | 1 | Insert Bowl #2 For 27-1/2" Rotary Table (New) | No Photo |
| W-04 | RT | 1 | Insert Bowl #3 For 27-1/2" Rotary Table (New) | No Photo |
| H-06 | RT | 1 | Master Bushing, 37-1/2" Hinged, API Varco For Oilwell & GD Rotary Table | Photo |
| D-247 | RT | 1 | Master Bushing, Split, 27-1/2" (Good Used Condition) | Photo |
| H-05 | RT | 1 | Rotary Table, Emsco T-275, 27-1/2" X 53-1/4", Missing Top | Photo |
| D-547 | RT | 1 | Rotary Table, Gardner Denver, 37-1/2", Less Bushing | Photo |
| D-820 | RT | 1 | Rotary Table, Ideco 23" X 53-1/4", W/ Varco MSS Solid Master Bushing | Photo |
| R11-08 | RT | 1 | Rotary Table, Ideco 27-1/2" X 53-1/4", W/ Varco Pin Drive Master Bushing | Photo |
| D-640 | RT | 1 | Rotary Table, Lanzhou, ZP-275, 27-1/2" X 53-1/4", W/ Sq Drive Split Master Bushing, S/N 13070304 | Photo |
| D-858 | RT | 1 | Rotary Table, Qaoyou Huaxing, RT-275, 27-1/2" X 53-1/4", Gear Ratio 3.67, W/ Split Pin Drive Master Bushing, (New) | Photo |
| D-859 | RT | 1 | Rotary Table, Qaoyou Huaxing, RT-275, 27-1/2" X 53-1/4", Gear Ratio 3.67, W/ Split Pin Drive Master Bushing, (New) | Photo |
| D-762 | RT | 1 | Rotary Table, National C-27.5, 27-1/2" X 53-1/4", Sq Drive, (Rebuilt With Data Book) | No Photo |
| D-388 | RT | 1 | Rotary Table, ZP-275, 27-1/2" X 53-1/4", W/ Split Pin Drive Master Bushing, (New) | Photo |
| D-387 | RT | 1 | Rotary Table, ZP-175, 17-1/2" X 44", W/ Split Sq Drive Master Bushing, (New) | Photo |
| R11-28 | SH | 1 | Parts House, 40' Shipping Container With Steel Shelving | Photo |
| R11-39 | SH | 1 | Parts/Change House, 8'W X 24'L Crimped Wall Round Top, Lights, (2) Benches, Skidded | Photo |
| R11-30 | SH | 1 | Top Dog House, 8'W X 24'L Crimped Wall Round Top, Knowledge Box, Bench Storage, (4) Lockers, Shelves, Lights, Skidded | Photo |
| R11-05 | SR | 1 | Drillng Line, 1-1/4", On Spool Rack W/ Electric Spooler | Photo |
| H-16 | SV | 4 | Crown Sheaves 42" X 1-1/4" | Photo |
| D-819 | SV | 2 | Crown Sheaves, 42" X 1-1/8" Line | Photo |
| D-354 | SW | 1 | Swivel, Emsco LB-200, W/ Body, Bail, Bumper, Top Guard, Missing Wash Pipe Assembly, Quiel, Bottom Flange | Photo |
| 310-04 | SW | 1 | Swivel, Jiangsu Rushi, (New) SL135, 150-US Ton, 6-5/8" Reg LH, Rated Work Load 110-US Ton, Max Speed 300 R/Min, Max Work Pressure 5000-PSI, 3860 LB, API Certified 8A-0063, S/N 08154 | Photo |
| R11-07 | SW | 1 | Swivel, National N-815, 400-Ton | Photo |
| R11-01C | TR | 3 | Transmissions, Allison 6061 | Photo |
| H-04 | TR | 1 | Allison HT750 Transmission, S/N 3049802 | Photo |
| R11-25 | VA | 1 | Choke Manifold, Church Energy Services, W/ (10) JFC 4-1/16"- 10M Gate Valves, (1) 5-Way Cross, (1) 3-Way Cross, Adapter Flange, 4-1/16" Adj Choke, Skidded | Photo |
| D-838 | VA | 1 | Lot, (17) Gate Valves, Flanged, (10) CIW 3-1/16"- 10M FLS, (4) CIW 2-1/16"- 10M, (2) CIW 3-1/8"- 5M FC, (1) 1-3/4" | Photo |
